Anamet Europe has launched the new flexible stainless steel conduit system featuring push-on fittings which mean that it can be fitted to cables in just minutes.

The conduit system is manufactured from corrugated stainless steel hose and can withstand temperatures between -70°C to +250°C. It is liquid-tight, consists of a continuous tube allowing optimum EMI/EMP shielding to be obtained and when used in conjunction with the ANAFLEX-CLICK fittings, achieves a seal to IP69K standard. It is highly resistant to oils greases and solvents and should a fire break out, there will be no toxic fumes.

The fittings are manufactured from nickel-plated brass and fitting them to the ANAFLEX piping couldn’t be easier – simply cut the hose to the correct length and thread onto the cable. Then turn back the nut on the fittings by half a turn to release the retaining ring and push the fitting firmly into the hose until it fits flushly against the seal. Finally tighten the nut using a wrench to ensure it is totally sealed and watertight.

The ANAFLEX system is available in three sizes with the tube’s internal diameter measurements between 12.2 mm and 20.3 mm. Fitting threads offered are M16, M20 and M25

Contact details

electrical industry cable management news,thepanelbuilder.co.uk