Manufacturer/Service Provider Brochure Downloads
A concise guide detailing how HSE will assess compliance across its three major inspection topics – functional safety, explosive and toxic gas atmospheres and electrical power systems.
The new Official Journal for the Machinery Directive has been published with effect from 5 April 2013. The Official Journal contains a current list of the standards harmonised under the Machinery Directive 2006/42/EC and their reference data.
Rittal has recognised a rise in the popularity of laminated copper bars in the OEM and panel builder market and produced a technical guide, which shows how to calculate fault rating capacities of their laminated copper bar.
This Technical Report has been produced to meet a demand for an authoritative guide on best practice for the installation of Power Drive Systems. It is the result of a study carried out by GAMBICA and REMA, taking note of well-established fundamental theory, technical papers, and carrying out specific investigations. The information given, while it can be applied to motors and inverters in general, is specific to current generation products of member companies.
The Technical Report principally considers the aspects of safe mechanical and electrical installation and the avoidance of EMC problems.
This report covers motors and inverters installed with a separate cabling system connecting the components together; it is not wholly applicable to inverters integrated into a motor design, which are now generally available up to 7.5 kW.
As there is no published Code of Practice describing the requirements for the safe installation of Ex nA instrumentation in Zone 2 hazardous areas, BEKA have produced a 26 page Application Guide AG310.
The Danfoss VLT Drives engineering guide contains all the aspects related to the design of VSD applications in project engineering and facility management.
The Safety Compendium gives those working in mechanical engineering an orientation guide on the subject of functional safety and standards. The 2012 edition represents a completely revised and expanded version.
The PlantPAx™ Process Automation System is a defined set of standard Rockwell Automation® Integrated Architecture™ products that are configured in a prescribed way to provide optimal performance as a process automation system. When combining PlantPAx core system components, tools, and utilities, with other Rockwell Automation and partners’ products, the result is unmatched automation system flexibility, scalability, and expandability when solving continuous batch as well as high-speed discrete applications.
With effect from 20.07.2011, the European Commission has published a new edition of the Official Journal for the Machinery Directive. The content of the Official Journal is a current list of the standards harmonised under the Machinery Directive 2006/42/EC and their reference data.
Guide to Forms of Separation July 2011
Forms of internal separation in BS EN 61439-2 are subject to agreement between the manufacturer and the user. BEAMA recommends this Guide as an appropriate basis for such an agreement. This sixth edition of the Guide has been produced to be in line with BS EN 61439-2 and remains essential reading for both specifier's and users. The Guide is intended to assist in selecting the most appropriate form of separation for a given application.
Guide to Verification relating to BS EN 61439-2 July 2011
Explains in clear and simple terms, exactly how manufacturers can comply with the requirements of the 61439-2 standard relating to assembly verification
ECA and BEAMA Power Factor Correction Guidance Document V5
Some manufacturers of variable speed electrical Power Drive Systems now offer products with safety-related functionality. This guide sets out the functional safety considerations for the selection and application of these products to machinery. It does not set out requirements for the manufacture of these products.
It is the responsibility of the machine builder to ensure the safety of their machine. The control system of a machine can play a part in its safety performance (i.e. functional safety), and so any modification to the control system requires a reappraisal of the machine’s risk assessment.
As the installation of a drive into a machine can represent a considerable modification to its control system, it has the potential to affect the safety performance of the machine. The implications of such a modification must therefore be carefully considered.
Selection of a drive with appropriate safety functions is critical, as is the subsequent integration of that drive with other components into the control system of the machine.
A drive with safety functionality can be used to implement specific safety functions. A drive with no safety functionality should not be relied upon to implement any safety functions, without the use of supplementary safety-related control systems
The use of a safety-related drive in a machine will not necessarily result in a safe machine.
The RCD Handbook – BEAMA Guide to the Selection and Application of Residual Current Devices – 2010 has been revised to align it with the Seventeenth Edition of the IET Wiring Regulations (BS 7671:2008). Key changes include:
* The inclusion of products introduced since the 2003 edition such as Fused Connection Units Incorporating a Residual Current Device (FCURCD).
* Explanations of new terms introduced in the Seventeenth edition, such as ‘Protective Earthing’ and ‘Protective Equipotential Bonding’.
* Revisions & improvements to aid the selection of the correct RCD and to find faults in RCD Protected Installations
The purpose of this guide is to assist the end user in the selection of the best Motor and Control technology for a given application. It addresses the differences in motor efficiency ratings, the considerations and benefits of different control methods, and the issues that affect the decision making process for fixed or variable speed control.
Current rating of low voltage electrical switchgear assemblies
LOW-VOLTAGE POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES
A guide to the requirements of
BS EN 61439-1:2009
BS EN 61439-2:2009